PS5 Pro cleaning
& liquid metal.
Full dust removal and fresh liquid metal — the same interface Sony used at the factory, replaced when it matters. Cool and quiet again, even under 4K load. On-site across Helsinki, Espoo, Vantaa and Kerava. Free diagnostics. 90-day warranty.
Pick your tier.
Two service options. Same liquid metal and pads in every tier — you pay for depth of work, not materials. Not sure which? We'll say which one it actually needs when we quote.
Full disassembly, dust removal and fresh liquid metal on the PS5 Pro APU. Heatsink and fan stripped and cleaned.
- Full disassembly and cleaning
- Fresh liquid metal on the APU
- Heatsink and fan stripped and cleaned
- Noticeably cooler and quieter
- 90-day warranty
- Free diagnostics
Full disassembly, fresh liquid metal and complete thermal pad replacement. Best for heavy 4K gaming.
- Full disassembly and cleaning
- Fresh liquid metal on the APU
- Full thermal pad replacement
- Maximum cooling for 4K load
- 90-day warranty
- Free diagnostics
Meet Andrei.
When you book MopsiHuolto, the same person picks up the phone, drives to your door and works on your device. He's a certified repair technician with 20+ years of hands-on electronics experience — soldering, console maintenance, high-end laptop servicing.
Read the full story →You don't go anywhere.
Almost every job happens on your own table. Not as a perk — it is simply the arrangement that works better for both of us.
Is your PS5 Pro
showing these signs?
The PS5 Pro runs a more powerful GPU than base PS5 — more compute means more heat. If you notice any of these, liquid metal service is overdue.
Noticeable fan spin-up during graphics-intensive titles even in a clean room. The vapor chamber needs full airflow — any dust restriction triggers early ramp.
Console shuts down under load with thermal warning. The larger GPU die means the liquid metal interface carries more heat — migration accelerates the issue.
Frame pacing issues or resolution drops in titles using PS5 Pro's upscaling. Thermal throttle reduces GPU clock before you can see temp readings.
Grey buildup around intake slots. The PS5 Pro's increased airflow demand means even moderate dust has a bigger thermal impact than on base PS5.
What overheating actually costs you.
A console does not wear out gracefully — it dies. And in the months before it does, it shuts down on you mid-evening.
It is not wear and tear. Chronic overheating takes out memory, the APU or the SSD. When one of those goes, no cleaning brings it back.
The PCB is green when it leaves the factory. Where it has been baking, it turns yellow-brown — and the joints under the APU crack or start to lift off.
On a board that far gone, taking it apart — carefully, as we do — can be what finishes an already-cracked joint. Sometimes it does not come back up. Better heard now than afterwards.
A new PS5 Pro in Finland is about €800. A clean is €99, every two to three years. You are not spending money on the console — you are keeping the one you have.
How it works.
Four steps. No surprises, no fine print, no pressure to upgrade mid-service.
Call, WhatsApp or Telegram. We arrange a time that works — mornings, evenings, weekends.
Tell us what it does — shutdowns under 4K, fan noise, and whether liquid metal has ever been applied. A Pro whose liquid metal has migrated behaves in a way we recognise. You get a fixed price before we set off.
Full disassembly, dust removal, fresh liquid metal on the APU, thermal pad replacement on GPU RAM and VRM.
Reassembled, then we start the 4K title it used to struggle with and let it run. It has to stay quiet and stay on before we pack up.
Before / After.
What actually changes after a full service — the difference you notice sitting in front of it. We do not quote you degrees: a console does not report its APU temperature to any software, so nobody can read it without soldering a probe to the board. Anyone showing you exact numbers is guessing.
Liquid metal conducts heat at 60–80 W/mK vs 5–15 W/mK for thermal paste — see TronicsFix for the comparison.
487+ reviews
since 2017.
“Quick response and we were able to arrange a PS5 cleaning for the next day. Calm and dedicated to his work. PS5 worked flawlessly after the cleaning, I recommend ☺️”
“My PS5 was making noise and one day I got a popup that it is overheating. I called Mopsi and got an appointment for the next day. The PS5 was cleaned of 6 years of dust, and liquid metal change in an hour. It's now silent again! Excellent service, no hassle, and the location was perfect (my kitchen).”
“Everything was done in the best possible way!!!!Now my PS5 is perfect!”
Questions,
answered.
Couldn't find what you need? Call us — we reply in minutes.
Does PS5 Pro come with liquid metal from the factory?+
Yes — Sony applied gallium-based liquid metal to the PS5 Pro APU at the factory, the same approach used in the base PS5. Over time and under heavy thermal cycling, this liquid metal can migrate off the die or degrade. Our service replaces it with fresh liquid metal and restores original cooling performance.
What actually changes after the service?+
Your PS5 Pro is cool and quiet again under 4K load — from an audible jet-engine ramp to near-silent, and it stops cutting out mid-session. We do not quote you a number of degrees: a console does not report its APU temperature to any software, so nobody can read it without soldering a probe to the board.
Will this void my Sony warranty?+
Opening the console voids the manufacturer warranty. We provide our own 90-day warranty covering the liquid metal application, thermal pad replacement and workmanship. If your Sony warranty has already expired, this service is the best way to restore peak cooling performance.
How long does the full service take?+
The complete PS5 Pro liquid metal + thermal pad service takes about 1.5 hours. This includes careful disassembly, thorough cleaning, liquid metal application, thermal pad replacement, precise reassembly and stress testing under 4K load.
Do you come to my location?+
Yes — most PS5 Pro cleaning is done at your home or office within Helsinki, Espoo and Vantaa. Travel is included in the price. Kerava and anywhere else beyond Kehä III: we still come, with €0.50/km on top and travel for agreed work only.
Is PS5 Pro harder to service than base PS5?+
The internal structure is very similar to PS5. Key differences: the vapor chamber is larger (more surface area, better thermal performance), and the GPU die is larger — liquid metal application requires slightly more precision to avoid the edges. We've serviced both models extensively and use the same ESD-safe bench for both.
Worth reading first.
Sony put liquid metal, not paste, under the PS5 heatsink. Why it needs different handling, how it fails, and what a correct re-application involves.
There is no fixed interval: a PS5 needs cleaning when the signs show. What dust does inside, what Sony says to clean at home, and when to open it up.
A PS5 that switches off mid-game is its heat protection at work, not a random fault. The warning signs, the usual causes, and what fixes it for good.
Related services.
Dust removal, liquid metal and thermal paste for base PS5. Same process, different tier.
Stops shutdowns and the jet-engine fan on PS4. Full thermal paste service.
Fix stick drift with a Hall Effect / TMR module. Flat-rate pricing, 90-day warranty.
Book PS5 Pro cleaning.
Quiet console, restored cooling. 90-day warranty. Free diagnostics before any work.